Configuration data

Index 8pp0 AS-i settings slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:0	ASI Settings Slave	Max. subindex	UINT8	RO	> 41 <
8pp0:01	ASI Address	Slave address (see table below)	UINT16	RW	0x0000 (0_dec)

Bit	Value	Description
0 - 4	0 - 31 (default 0)	Slave address (0=>entry inactive, XX=>entry active) (Slave address arises from bit 4 to bit 8 of the index (0x8pp0)
5 - 11	-	reserved
12	0_bin	A-slave or standard slave not projected
12	1_bin	A-slave or standard slave projected
13	0_bin	B-slave not projected
13	1_bin	B-slave projected
14 - 15	-	reserved

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:20	IO Configuration (A-slave)	Projected I/O ID (set configuration) In protected mode, the I/O ID of the projected AS-i slaves is checked. The projected 4-bit I/O ID of the AS-i slaves is located in the object 0x8pp0:20 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	IO Config (A-slave or standard slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:21	ID code (A-slave)	Projected ID code (nominal configuration) In protected mode, the ID code of the projected AS-i slaves is checked. The projected 4-bit ID codes of the AS-i slaves are located in the object 0x8pp0:21 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	IO code (A-slave or standard slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:22	Extended ID code 1 (A-slave)	Projected extended ID code 1 (nominal configuration) In protected mode, the extended ID code 1 of the currently projected AS-i slaves is checked. The projected 4-bit Extended ID codes 1 of the AS-i slaves are located in the object 0x8pp0:22 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	Extended ID code 1 (A-slave or standard slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:23	Extended ID code 2 (A-slave)	Projected extended ID code 2 (nominal configuration) In protected mode, the extended ID code 2 of the currently projected AS-i slaves is checked. The projected 4-bit Extended ID codes 1 of the AS-i slaves are located in the object 0x8pp0:23 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	Extended ID code 2 (A-slave or standard slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:24	Parameter (A-slave)	Activation parameters for the AS-i slaves During the activation phase (or during the inclusion phase - for AS-i slaves that are added later), 4-bit parameter data are sent once to each AS-i slave prior to the first data exchange. These activation parameters can be specified for each AS-i slave via the objects 0x8pp0:24. The objects 0x8pp0:24 can be read and written and are saved in the Flash of the AS-i master, i.e. they are still present after power off/on of the AS-i master. (see following table)	UINT8	RW	0x0F (15_dec)

Index (hex)

Name

Meaning

Data type

Flags

Default

8pp0:24

Parameter (A-slave)

Activation parameters for the AS-i slaves

During the activation phase (or during the inclusion phase - for AS-i slaves that are added later), 4-bit parameter data are sent once to each AS-i slave prior to the first data exchange. These activation parameters can be specified for each AS-i slave via the objects 0x8pp0:24.
The objects 0x8pp0:24 can be read and written and are saved in the Flash of the AS-i master, i.e. they are still present after power off/on of the AS-i master. (see following table)

UINT8

0x0F (15_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 15)	Parameter (A-slave or standard slave)
4 - 7	-	reserved

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:25	IO Configuration (B-slave)	Projected I/O ID (set configuration) In protected mode, the I/O ID of the projected AS-i slaves is checked. The projected 4-bit I/O ID of the AS-i slaves is located in the object 0x8pp0:20 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	IO Config (B-slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:26	ID code (B-slave)	Projected ID code (nominal configuration) In protected mode, the ID code of the projected AS-i slaves is checked. The projected 4-bit ID codes of the AS-i slaves are located in the object 0x8pp0:21 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	ID code (B-slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:27	Extended ID Code 1 (B-slave)	Projected extended ID code 1 (nominal configuration) In protected mode, the extended ID code 1 of the currently projected AS-i slaves is checked. The projected 4-bit Extended ID codes 1 of the AS-i slaves are located in the object 0x8pp0:22 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Index (hex)

Name

Meaning

Data type

Flags

Default

8pp0:27

Extended ID Code 1 (B-slave)

Projected extended ID code 1 (nominal configuration)

In protected mode, the extended ID code 1 of the currently projected AS-i slaves is checked. The projected 4-bit Extended ID codes 1 of the AS-i slaves are located in the object 0x8pp0:22 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)

UINT8

0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	Extended ID Code 1 (B-slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:28	Extended ID Code 2 (B-slave)	Projected extended ID code 2 (nominal configuration) In protected mode, the extended ID code 2 of the currently projected AS-i slaves is checked. The projected 4-bit Extended ID codes 1 of the AS-i slaves are located in the object 0x8pp0:23 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)	UINT8	RW	0x00 (0_dec)

Index (hex)

Name

Meaning

Data type

Flags

Default

8pp0:28

Extended ID Code 2 (B-slave)

Projected extended ID code 2 (nominal configuration)

In protected mode, the extended ID code 2 of the currently projected AS-i slaves is checked. The projected 4-bit Extended ID codes 1 of the AS-i slaves are located in the object 0x8pp0:23 (these objects are read-write and are saved in the Flash of the AS-i master (i.e. they are still present after power off/on)): (see following table)

UINT8

0x00 (0_dec)

Bit	Value	Description
0 - 3	0 - 15 (default 0)	Extended ID Code 2 (B-slave)
4 - 6	-	reserved
7	0	Value is taken into account when comparing set/actual configuration in protected mode
7	1	Value is ignored when comparing set/actual configuration in protected mode

Index 8pp0 ASI Settings Slave (for 01 ≤ pp ≤ 1F; slave 1 to slave 31)

Index (hex)	Name	Meaning	Data type	Flags	Default
8pp0:29	Parameter (B-slave)	Activation parameters for the AS-i slaves During the activation phase (or during the inclusion phase - for AS-i slaves that are added later), 4-bit parameter data are sent once to each AS-i slave prior to the first data exchange. These activation parameters can be specified for each AS-i slave via the objects 0x8pp0:24. The objects 0x8pp0:24 can be read and written and are saved in the Flash of the AS-i master, i.e. they are still present after power off/on of the AS-i master. (see following table)	UINT8	RW	0x07 (7_dec)

Index (hex)

Name

Meaning

Data type

Flags

Default

8pp0:29

Parameter (B-slave)

Activation parameters for the AS-i slaves

The objects 0x8pp0:24 can be read and written and are saved in the Flash of the AS-i master, i.e. they are still present after power off/on of the AS-i master. (see following table)

UINT8

0x07 (7_dec)

Bit	Value	Description
0 - 2	0 - 7 (default 7)	Parameter (B-slave)
3 - 7	-	reserved