EL5131 – connection

EL5131 – connection 1:
EL5131 – connection

Terminal point

No.

Comment

A

1

Encoder input A

B

2

Encoder input B

C

3

Encoder input C

Status Input

4

Status input
The Status Input is internally connected to 5 V via a pull-up resistor. The encoder fault signal output must actively pull the signal against GND.
The external supply is not recommended. If an external supply is used, the maximum permitted voltage is 5 V against GND.

+ Ue

5

Encoder supply (5 V default, parameterizable 12 V, 24 V)

-Uo

6

0 V encoder supply

Latch

7

Latch extern input

Digital output 1

8

Digital output 1

A̅

9

Encoder input A̅

B̅

10

Encoder input B̅

C̅

11

Encoder input C̅

n.c.

12

Do not connect the terminal point

+ Ue

13

Encoder supply (5 V default, parameterizable 12 V, 24 V)

-Uo

14

0 V encoder supply

Gate/latch

15

The Gate input can also be used as Latch extern 2 input

Digital output 2

16

Digital output 2

Notice

Setting the encoder supply voltage

  • Before switching to a higher voltage, make sure that the connected encoder supports the selected voltage range!
  • Note the output power limitation (5 VDC to 0.3 A, 12 VDC to 0.15 A, and 24 VDC to 0.3 A).
  • To write to 0x8001:17 "Supply voltage" you have to set the value 0x72657375 (ASCII: "user") in index 0xF008 "Code word".
Further Information