Technical data

Number of inputs

2

Connection technology

2 or 4 wire

Measuring range

9 measuring ranges with measuring range setpoint 100 mΩ ... 10 MΩ:

0..0.1 Ω, 0..1 Ω, 0..10 Ω, 0..100 Ω, 0..1 kΩ, 0..10 kΩ, 0..100 kΩ, 0..1 MΩ, 0..10 MΩ MΩ, 0..10 MΩ

Resolution

24 bits incl. sign

Sampling type

simultaneous

Ground reference

single ended

Conversion time

10 ms ..400 ms; depends on measuring range; operation mode (alternating, one channel), waiting time, filter settings

Broken wire detection

yes

Internal resistance

>100 MΩ

Filter characteristics

Hardware 5 kHz, Firmware adjustable 2.5 - 100 Hz

Measuring error

<0.5% (relative to the respective full scale value with 4-wire connection)

Supply voltage for electronics

via the E-bus

Current consumption via E-bus

typ. 220 mA

Distributed Clocks

No

Special features

automatic range selection; "auto range", pulse and continuous measurement

Width in the process image

max. 24 bytes input, max. 4 bytes output

Electrical isolation

1500 V (E-bus/field voltage)

Configuration

via TwinCAT System Manager

Weight

approx. 60 g

permissible ambient temperature range during operation

0 °C ... + 55 °C

permissible ambient temperature range during storage

-25 °C ... + 85 °C

permissible relative humidity

95 %, no condensation

Dimensions (W x H x D)

approx. 15 mm x 100 mm x 70 mm (width aligned: 12 mm)

Mounting

on 35 mm mounting rail conforms to EN 60715

Vibration/shock resistance

conforms to EN 60068-2-6 / EN 60068-2-27
see also installation instructions for terminals with increased mechanical load capacity

EMC immunity/emission

conforms to EN 61000-6-2 / EN 61000-6-4

Protection class

IP20

Installation position

variable

Calibration certificate

-

yes (factory calibration certificate)

yes (DAkkS or ISO17025)

Marking / Approval^*)

CE, EAC, UKCA
cULus, ATEX

CE, EAC, UKCA

ATEX

II 3 G Ex nA IIC T4 Gc