Technical data

Number of inputs

8

Sensor types

Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000
KT/KTY, resistance measurement 10 Ω...1 kΩ or 10 Ω...4 kΩ (e.g. for potentiometer connection)

Connection technology

2-wire

Input filter limit range

typ. 1 kHz

Measuring range

-200…+850°C (PT sensors);
-60…+250°C (Ni sensors)

Resolution (default)

0.1°C per digit

Sampling type

Multiplex

Ground reference

Single-ended

Conversion time

Approx. 3 ms.. 1600 ms (configurable),
depending on configuration and filter setting

ADC conversion method

ΔΣ (Delta-Sigma)

Measuring current (depending on the sensor element and temperature)

typ. < 0.5 mA

Sensor supply

Continuous current (not switched)

Measuring error

< ±0.5°C for Pt sensors
< ±1.5°C (extended temperature range)

Support NoCoEStorage

Yes

Width in the process image

Max. 32 bytes input

Power supply for the electronics

via the E-bus

Current consumption via E-bus

typ. 140 mA

Electrical isolation

500 V (E-bus/field voltage)

Configuration

via TwinCAT System Manager

Weight

Approx. 60 g

Permissible ambient temperature range during operation

-25°C... +60°C

Permissible ambient temperature range during storage

-40°C... +85°C

Permissible relative air humidity

95%, no condensation

Dimensions (W x H x D)

Approx. 15 mm x 100 mm x 70 mm (width aligned: 12 mm)

Assembly

On 35 mm mounting rail in compliance with EN 60715

Enhanced mechanical load capacity

Yes, see also Installation instructions for terminals with enhanced mechanical load capacity

Vibration / shock resistance

In accordance with EN 60068-2-6 / EN 60068-2-27

EMC immunity / emission

In accordance with EN 61000-6-2 / EN 61000-6-4

Protection rating

IP20

Installation position

Any

Identification / approval^*)

CE, EAC, UKCA
cULus