Destruction of the devices by electrostatic discharge possible! The devices contain components at risk from electrostatic discharge caused by improper handling. - When handling the components, ensure that there is no electrostatic discharge; also avoid touching the spring contacts directly (see illustration).
- Contact with highly insulating materials (synthetic fibers, plastic films, etc.) should be avoided when handling components at the same time.
- When handling the components, ensure that the environment (workplace, packaging and persons) is properly earthed.
- Each bus station must be terminated on the right-hand side with the EL9011 or EL9012 end cap to ensure the degree of protection and ESD protection.
| 
Fig.12: Spring contacts of the Beckhoff I/O components