Installation on mounting rails – Bus Coupler
Snapping onto the mounting rail
The Bus Coupler can simply be snapped onto the mounting rail. To this end position the block on the mounting rail and push it slightly until it engages on the right-hand side. This is indicated by a distinct click. Use a screwdriver to push up the lock on the left-hand side, thereby turning it and causing it to engage audibly.
Notice | |
Avoid damage! Do not force the module or apply excessive pressure! |
Installation positions
The installation position of the Bus Coupler is arbitrary.
Notice | |
Installation position of EtherCAT terminals Observe the installation position of the EtherCAT terminals used – not all of them have an arbitrary installation position. Pay attention to the respective EtherCAT infrastructure components and installation instructions. |
Notice | |
Comply with the permitted installation position and minimum distances! We recommend the installation in the horizontal position for optimum ventilation. Furthermore, it is not necessary with this installation position to check whether there are terminals present that may only be installed horizontally. |
Other installation positions are allowed, but not recommended.
