Technical data - Modbus
Technical data Ethernet | EK9000 |
|---|---|
Number of ports | 2 |
integrated switch | 2 x Ethernet 100 Mbit/s, 1 x USB device (behind the front flap) |
Bus interface | 2 x RJ 45 (switched) |
100 Mbit/s | Yes, full duplex |
Autocrossing | Yes |
Protocol |
|
ModbusTCP | Yes |
ModbusUDP | Yes |
Functions/service |
|
Read Coils 1 | Yes |
Read Discrete Inputs 2 | Yes |
Read Holding Register 3 | Yes |
Read Input Register 4 | Yes |
Write Single Coil 5 | Yes |
Diagnostics 8 | Yes |
Write Single Register 6 | Yes |
Write Multiple Coils 15 | Yes |
Write Multiple Register 16 | Yes |
Read/Write Multiple Register 23 | Yes |
TCP/IP | Yes |
ARP | Yes |
Web services | Yes |
DHCP | Yes |
Diagnosis/Status/Alarm |
|
RUN LED | Yes, green/red |
WD LED | Yes, green/red |
ERR LED | Yes, green/red |
A station consists of an EKxxxx and a number of EtherCAT Terminals. | Yes |
Diagnostic messages | Yes |