1. EK1322 - 2-port EtherCAT P junction with feed-in
2. Product overview
3. Introduction

Introduction

EK1322 | 2‑port EtherCAT P junction with feed‑in

The 2‑port EK1322 EtherCAT P junction enables configuration of EtherCAT P star topologies. The ports can be used to connect individual EtherCAT P devices or whole EtherCAT P strands. The EK1322 can be installed at any point in an EtherCAT strand between the EtherCAT Terminals (ELxxxx). The front terminal points are used for the system and sensor supply U_S and the peripheral voltage for actuators U_P for the EtherCAT P outputs. In addition to the Run LED and the link and activity status of the respective port, two status LEDs indicate the state of the U_S and U_P voltages, as well as overload and short‑circuit events.