Technical data

Task in the EtherCAT system

Conversion of the E-bus signals to 100BASE-TX Ethernet for extension of the EtherCAT P network

Transmission medium

EtherCAT P cable, shielded, to 100BASE-TX

Businterface

1 x M8 socket, shielded, screw type, EtherCAT-P-coded

Cable length between two Bus Couplers

max. 75 m

Protocol / Baud rate

all EtherCAT protocols / 100 MBaud

Delay

approx. 1 µs

Configuration

not necessary

Power supply

external feed-in: 24 V DC (-15 %/+20 %) for U_S and U_P

Total current

max. 3 A each U_S and U_P

Current consumption from U_S

typ. 3 mA

Current consumption from U_P

typ. 3 mA

Current rating per port

max. 3 A each U_S and U_P

Current consumption E-bus

typ. 110 mA

Electrical isolation

500 V (supply voltage U_S / supply voltage U_P / EtherCAT)

Dimensions (W x H x D)

approx. 44 mm x 100 mm x 68 mm

Weight

approx. 120 g

Permissible ambient temperature range during operation

0°C ... +55°C

Permissible ambient temperature range during storage

-25°C ... + 85°C

Permissible relative humidity

95%, no condensation

Mounting

on 35 mm mounting rail conforms to EN 60715

Vibration/shock resistance

conforms to EN 60068-2-6 / EN 60068-2-27,
see also installation instructions for enhanced mechanical load capacity

EMC immunity/emission

conforms to EN 61000-6-2 / EN 61000-6-4

Protection class

IP20

Installation position

variable

Approval *⁾

CE, UKCA, EAC, cULus