Technical data
Technical data | EK1110 | EK1110-0008 |
|---|---|---|
Task in the EtherCAT system | Conversion of the E-bus signals to 100BASE-TX Ethernet for extension of the EtherCAT network | |
Transmission medium | Ethernet CAT 5 cable (shielded) | |
Cable length between two Bus Couplers | max. 100 m (100BASE-TX) | |
Protocol / Baud rate | any EtherCAT protocol / 100 Mbaud | |
Delay | approx. 1 µs | |
Configuration | no address and configuration settings required | |
Bus connection | 1 x RJ45 | 1 x M8, shielded, screw type |
Power supply | from E-bus | |
Current consumption | typ. 130 mA | |
Dielectric strength | 500 V (supply voltage/EtherCAT) | |
Dimensions (W x H x D) | approx. 44 mm x 100 mm x 68 mm | |
Weight | approx. 50 g | |
Permissible ambient temperature range during operation | -25°C ... +60°C | |
Permissible ambient temperature range during storage | -40°C ... + 85°C | |
Permissible relative humidity | 95%, no condensation | |
on 35 mm mounting rail conforms to EN 60715 | ||
Enhanced mechanical load capacity | yes, see also installation instructions for enhanced mechanical load capacity | |
Vibration/shock resistance | conforms to EN 60068-2-6 / EN 60068-2-27 | |
EMC immunity/emission | conforms to EN 61000-6-2 / EN 61000-6-4 | |
Protection class | IP20 | |
Installation position | variable | |
Approval / Marking*) | ||
*) Real applicable approvals/markings see type plate on the side (product marking).
Ex markings
Standard | Marking |
|---|---|
ATEX | II 3 G Ex nA IIC T4 Gc |
IECEx | Ex nA IIC T4 Gc |