Fasten on mounting rail

The housing is designed so that the EK1000 can be held against the mounting rail and snapped onto it. A lock on the left side of the EK1000 secures it to the mounting rail

Requirements::

Mounting rail of type TS35/7.5 or TS35/15 according to DIN EN 60715

Attach the EK1000 to the mounting rail as follows:

1. Place the EK1000 frontally on the mounting rail. Press the EK1000 lightly against the mounting rail until it clicks quietly and the EK1000 is engaged.

Fasten on mounting rail 1: — EK1000 mounting on mounting rail

2. Then lock the latch on the left side of the EtherCAT coupler. Use a screwdriver to do this.

Fasten on mounting rail 2: — Locking the latch

Check that the EK1000 has been correctly mounted and that it has latched onto the mounting rail.