Technical data

Technical data	EJ6080
Total memory	128 kbyte (=131,072 byte) NOVRAM (non-volatile RAM)
Max. available storage space, cyclic access	1280 byte
Max. available storage space, acyclic access	up to 128 kByte in objects with a size of up to 8190 bytes, depending on variable structure, see chapter Calculation of the storage space
Distributed Clocks (DC)	no
Current consumption via E-bus	typ. 120 mA
Configuration	with TwinCAT System Manager
Permissible ambient temperature range during operation	-25°C... + 60°C (extended temperature range)
Permissible ambient temperature range during storage	-40°C... + 85 °C
Permissible relative air humidity	95 %, no condensation
Operating altitude	max. 2,000 m
Dimensions (W x H x D)	approx. 12 mm x 66 mm x 55 mm
Weight	approx. 30 g
Mounting	on signal distribution board
Installation position	Standard
Position of the coding pins	2 and 5
Color coding	gray
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27 (with corresponding signal distribution board)
EMC immunity/emission	conforms to EN 61000-6-2 /EN 61000-6-4 (with corresponding signal distribution board)
Protection rating	EJ module: IP20 EJ system: dependent on the signal distribution board
Identification / approval*	CE, UKCA

*) Real applicable approvals/markings see type plate on the side (product marking).

	CE approval The CE Marking refers to the EtherCAT plug‑in module mentioned above. If the EtherCAT plug-in module is used in the production of a ready-to-use end product (PCB in conjunction with a housing), the manufacturer of the end product must check compliance of the overall system with relevant directives and CE certification. To operate the EtherCAT plug‑in modules, they must be installed in a housing.