Technical Data

Technical data	EJ5042-0010
Technology	BiSS C interface, unidirectional
Encoder connection	binary input: D+, D-; Binary output: C+, C-
Encoder operating voltage	external power supply e.g. via EJ9505
Power supply for electronics	via Up contacts
Resolution	max. 64 bit position, 2 bit status, 8 bit CRC
Data transfer rate	adjustable up to 10 MHz (10 MHz default)
Current consumption from Up contacts	typ. 30 mA + load
Current consumption via E-bus	typ. 180 mA
Distributed Clocks	yes
Special features	adjustable baud rate, data length, two status bits (error and warning) can be evaluated separately
Configuration	via EtherCAT master/CoE
Electrical isolation	500 V (E-bus/field voltage)
Permissible ambient temperature range during operation	-25°C ... +60°C (extended temperature range)
Permissible ambient temperature range during storage	-40°C ... +85°C
Permissible relative air humidity	95%, no condensation
Operating altitude	max. 2,000 m
Dimensions (W x H x D)	approx. 12 mm x 66 mm x 55 mm
Weight	approx. 30 g
Mounting	on signal distribution board
Pollution degree	2
Mounting position	Standard
Position of the coding pins	2 and 5
Color coding	grey
Vibration/shock resistance	conforms to EN 60068-2-6 /EN 60068-2-27 (with corresponding signal distribution board)
EMC immunity/emission	conforms to EN 61000-6-2 /EN 61000-6-4 (with corresponding signal distribution board)
Protection class	EJ module: IP20 EJ system: dependent on the signal distribution board and housing
Approvals/markings*	CE, UKCA

*) Real applicable approvals/markings see type plate on the side (product marking).

	CE approval The CE Marking refers to the EtherCAT plug‑in module mentioned above. If the EtherCAT plug-in module is used in the production of a ready-to-use end product (PCB in conjunction with a housing), the manufacturer of the end product must check compliance of the overall system with relevant directives and CE certification. To operate the EtherCAT plug‑in modules, they must be installed in a housing.