Configuration data

Index 80n0 TC settings for 0 ≤ n ≤ 7 (Ch. 1 - 8)

Index (hex)

Name

Meaning

Data type

Flags

Default

80n0:0

TC Settings

Maximum subindex

UINT8

RO

0x1B (27dec)

80n0:01

Enable user scale

User scale is active.

BOOLEAN

RW

0x00 (0dec)

80n0:02

Presentation

0: Signed presentation

1: Absolute value with MSB as sign
Signed amount representation

2: High resolution (1/100°C)

BIT3

RW

0x00 (0dec)

80n0:05

Siemens bits

The S5 bits are superimposed on the three low-order bits (value 0x60n0:11)

Bit 0 = 1 (“overrange” or “underrange”)
Bit 1 (not used)
Bit 2 (not used)

BOOLEAN

RW

0x00 (0dec)

80n0:06

Enable filter

Enable filter, which makes PLC-cycle-synchronous data exchange unnecessary

BOOLEAN

RW

0x00 (0dec)

80n0:0A

Enable user calibration

Enabling of the user calibration

BOOLEAN

RW

0x00 (0dec)

80n0:0B

Enable vendor calibration

Enabling of the vendor calibration

BOOLEAN

RW

0x01 (1dec)

80n0:0C

Coldjunction compensation

0: internal

1: no
Cold junction compensation is not active

2: Extern process data
Cold junction compensation takes place via the process data (resolution [1/10]°C)

BIT2

RW

0x00 (0dec)

80n0:11

User scale offset

User scaling offset

INT16

RW

0x0000 (0dec)

80n0:12

User scale gain

This is the user scaling gain.
The gain is represented in fixed-point format, with the factor 2-16.
The value 1 corresponds to 65535 (0x00010000).

INT32

RW

0x00010000 (65536dec)

80n0:15

Filter settings

This object determines the digital filter settings, if it is active via Enable filter (index 80n0:06).
The possible settings are sequentially numbered.

0: 50 Hz
1: 60 Hz
2: 100 Hz
3: 500 Hz
4: 1 kHz
5: 2 kHz
6: 3.75 kHz
7: 7.5 kHz
8: 15 kHz
9: 30 kHz
10: 5 Hz
11: 10 Hz

UINT16

RW

0x0000 (0dec)

Index (hex)

Name

Meaning

Data type

Flags

Default

80n0:17

User calibration offset

User offset calibration

UINT16

RW

0x0000 (0dec)

80n0:18

User calibration gain

User gain compensation

UINT16

RW

0xFFFF (65535dec)

80n0:19

TC element

Thermocouple
Implemented temperature range

0: K, -200°C to 1370°C
1: J, -100°C to 1200°C
2: L, 0°C to 900°C
3: E, -100°C to 1000°C
4: T, -200°C to 400°C
5: N, -100°C to 1300°C
6: U, 0°C to 600 °C
7: B, 200°C to 1820°C
8: R, -50°C to 1767°C
9: S, -50°C to 1766°C
10: C, 0°C to 2320°C
100: +/-30mV (1µV resolution)
101: +/-60mV (2µV resolution)
102: +/-75mV (4µV resolution)

UINT16

RW

0x0000 (0dec)

Configuration data 1:

The filter characteristics are set via index 0x8000:15

The filter frequencies are set for all channels of the module centrally via index 0x8000:15 (channel 1). All other corresponding indices 0x80n0:15 have no parameterization function! The latest firmware version (see status table) returns an EtherCAT-compliant error message, if the filter characteristics of other channels (index 0x80n0:06, 0x80n0:15) are set.

Index 8080 RTD Settings Ch. 1

Index (hex)

Name

Bedeutung

Datentyp

Flags

Default

8080:0

RTD Settings Ch1.

Maximum subindex

UINT8

RO

0x1B (27dec)

8080:19

RTD element

RTD element

2: PT1000 (-200…850°C)
8: 1/16 Ohm resolution (0..4059 Ohm)

BOOLEAN

RW

0x02 (2dec)

8080:1A

Connection technology

Permitted values

0: Two-wire connection
3: not connected

BIT3

RW

0x00 (0dec)

8080:1B

Wire calibration 1/32 Ohm

Offset-value for calibration of supply lines [1/32] Ohm

INT16

RW

0x0000 (0dec)

Index 8090 RTD Settings Ch. 2

Index (hex)

Name

Bedeutung

Datentyp

Flags

Default

8090:0

RTD Settings Ch2.

Maximum subindex

UINT8

RO

0x1B (27dec)

8090:19

RTD element

RTD element

2: PT1000 (-200…850°C)
8: 1/16 Ohm resolution (0..4059 Ohm)

BOOLEAN

RW

0x02 (2dec)

8090:1A

Connection technology

Permitted values

0: Two-wire connection
3: not connected

BIT3

RW

0x00 (0dec)

8090:1B

Wire calibration 1/32 Ohm

Offset-value for calibration of supply lines [1/32] Ohm

INT16

RW

0x0000 (0dec)