Fastening to the DIN rail

The housing is designed such that the embedded PC can be pushed against the DIN rail and latched onto it.

Requirements:

DIN rail of the type TS35/7.5 or TS35/15 according to EN 60715.

Fasten the embedded PC to the DIN rail as follows:

1. Place the embedded PC on the DIN rail. Slightly press the embedded PC onto the DIN rail until a soft click can be heard and the embedded PC has latched.
Fastening to the DIN rail 1:

2. Subsequently, lock the catch on the left side of the embedded PC.

3. Turn the latch counter clockwise until the latch quietly clicks and engages.
Fastening to the DIN rail 2:

You have installed the embedded PC successfully. Check again that the mounting is correct and that the embedded PC is engaged on the DIN rail.