Linking EtherNet/IP devices
After you have appended the CX8095 to the tree view, the EtherNet/IP device with the name "CCAT EIP Adapter(Slave)" must be linked to the physical EtherNet/IP interface of the CX8095.
Prerequisites for this step:
- An EtherNet/IP slave is appended in the tree view.
Link the CX8095 as follows:
- 1. Mark the device with the name CCAT EIP Adapter(Slave) and the EtherNet/IP symbol that precedes it. This is the EtherNet/IP adapter for the CX8095.
- 2. Click on the Adapter tab and then on the Network Adapter option.
- 3. Click on the Search button to search for the existing EtherNet/IP devices.
The window Device Found At appears. - 4. Click on the appropriate EtherNet/IP device and then on OK.
- You have successfully linked the CX8095 to the physical Ethernet/IP interface. You can also link all other EtherNet/IP devices in the same way. A link is displayed on the Adapter tab under the Adapter Reference option.
