Image Update

There are two different possibilities to update the image of the CX80xx.

Requirements Please make sure before the update that your CX80xx supports the image that you want to load. When updating the image, please first update all existing files and only then copy the new image.

Always copy all files and directories in order to update a CX80xx.

Update via USB

A USB cable is required for this!

• Switch off the CX80xx
  
• 
• Set red dip switch (under the flap) DIP 1 to ON
• Switch on the CX
• Connect the PC with USB
• Delete all files (we recommend that you backup all files first), no formatting
• Wait until copying has finished, then remove the USB cable
• Switch DIP switch 1 to OFF
• Switch off the CX80xx
• Switch on the CX80xx; it may take a little longer the first time

Update the MicroSD card

A MicroSD card reader is required for this!

• Remove the MicroSD card from the switched-off CX device.
• Insert the MicroSD card into the reader
• Delete all files (we recommend that you backup all files first), no formatting
• Load the new image
• Wait until copying has finished, then remove the MicroSD card
• Insert the MicroSD card into the SD slot of the switched-off CX again
• Now switch on the CX again; it may take a little longer the first time