Starting the Beckhoff Device Manager

Using the Beckhoff Device Manager, an Industrial PC can be configured by remote access with the aid of a web browser. The access takes place via the HTTP protocol and Port 80 (TCP).

Requirements:

Host PC and Embedded PC must be located in the same network. The network firewall must allow access via port 80 (HTTP).
IP address or host name of the Embedded PC.

Access data for the Beckhoff Device Manager on delivery.
User name	Password
Administrator	1

Start the Beckhoff Device Manager as follows:

1. Open a web browser on the host PC.

2. Enter the IP address or the host name of the Industrial PC in the web browser to start the Beckhoff Device Manager.

Example with IP address: http://169.254.136.237/config
Example with host name: http://BTN-000f89fa/config

3. Enter the user name and password. The start page appears:
Starting the Beckhoff Device Manager 1:

Navigate forward in the menu and configure the Industrial PC. Note that modifications only become active once they have been confirmed. It may be necessary to restart the Industrial PC.