Virtual Ethernet interface
The virtual Ethernet interface integrates network adapters into the TwinCAT system. This makes it possible to establish a virtual Ethernet communication via ADS, TCP or UDP to a BK9xx0. Do not use more than two BK9xx0 and a cycle time > 50 ms.
Proceed as follows:
- 1. In the tree view on the left, right-click on Devices.
- 2. Click on Add New Item and select the Virtual Ethernet Interface.
- The Virtual Ethernet Interface is created in the tree view on the left. The ADS port number can be read out under the ADS tab. The Enable ADS Communication option must be active so that ADS communication to the BK9xx0 is possible.
