Setting the address

Once the CANopen slave was successfully added in TwinCAT, the address of the CANopen slave can be set. This step shows how to set the address in TwinCAT so that the CANopen slave can be reached by the CANopen master via this address.

Requirements for this step:

An added CANopen slave in TwinCAT.

Parameterize the CANopen slave as follows:

1. Click on a slave box.

2. Click the CAN Node tab.

3. Enter a value for the CANopen address in the Node Id field, e.g. “1”.
Setting the address 1:

You have set the address successfully. The CANopen master can reach the CANopen slave with the set address. You can now create further PDOs.