Structure

1

Optional interface (X300).

Space for interfaces such as RS232, EtherCAT, CANopen or others.
The optional interface must be ordered ex factory and cannot be retrofitted retrospectively.

2

DVI-D interface (X200).

Interface for a monitor or Panel.

3

CFast card slot (under the front flap).

Slot for industrial CFast cards.

4

MicroSD card slot (under the front flap).

Slot for industrial MicroSD cards.

5

RJ45 Ethernet interfaces (X000, X001).

For connecting to local networks or the internet.

6

Battery compartment (under the front flap).

Power supply for the battery-backed clock for time and date.

7

Diagnostic LEDs.

Diagnostic LEDs for power supply, TwinCAT and the optional interface.

8

USB interfaces (X100, X101, X102, X103).

Interfaces for peripheral devices such as mouse, keyboard or USB memory.

9

Diagnostic LEDs, power supply terminal.

Diagnosis of the power supply for the Embedded PC and the terminal bus. Status of the E-bus and K-bus communication.

10

Spring-loaded terminals, +24 V and 0 V

Power supply for Embedded PC.

11

Terminal bus (K-bus or E-bus)

Interface for EtherCAT Terminals or Bus Terminals. Data exchange and supply.

12

Spring-loaded terminal, +24 V

Power supply for Bus Terminals via power contact.

13

Spring-loaded terminal, 0 V

Power supply for Bus Terminals via power contact.

14

Terminal release

Releases the power supply terminal and thus the Embedded PC from the DIN rail.

15

Spring-loaded terminal, PE

Spring-loaded terminal for power contact PE.

16

Power contacts, +24 V, 0 V, PE

Power contacts for Bus Terminals.