PnP/PCI Configurations
This menu is used for configuring the PCI bus and Plug and Play Management.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
|
Init Display First |
[PCI Slot] |
Item Help |
|
Reset Configuration Data |
[Enabled] |
|
|
Resources Controlled By |
[Manual] |
|
|
υ8; IRQ Resources |
[Press Enter] |
|
|
|
|
|
|
PCI/VGA Palette Snoop |
[Disabled] |
|
|
|
|
|
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Init Display First
This option can be used to specify which graphics card should be initialised first: either PCI slot, onboard or PCIEx.
Reset Configuration Data
If activated, the option ensures that the BIOS deletes the information relating to built-in components and their resources and reconfigures them (all settings are reset). Setting options: Enabled, Disabled.
Resources Controlled By
Specifies whether the PnP settings should be assigned via setup or automatically. Auto should be used, if there are no problems with IRQ or DMA assignments. The default is auto.
IRQ Resources
If these resources are set manually, each system interrupt should be assigned a type, depending on the type of device using the interrupt.
PCI/VGA Palette Snoop
Used by multimedia video cards. This function should be switched on (Enabled), depending on the card. It is switched off by default.