Attaching on mounting rail

The housing is designed such that the Embedded PC can be pushed against the mounting rail and latched onto it.

Requirements:

Mounting rail of type TS35/7.5 or TS35/15 according to DIN EN 60715.

Secure the Embedded PC on the mounting rail as follows:

1. Unlock the latches at the top and bottom.
Attaching on mounting rail 1:

2. Place the Embedded PC at the front of the mounting rail. Slightly press the Embedded PC onto the mounting rail until a soft click can be heard and the Embedded PC has latched.
Attaching on mounting rail 2:

3. Then lock the latches again.
Attaching on mounting rail 3:

You have installed the Embedded PC successfully. Double-check the correct installation and latching of the Embedded PC on the mounting rail.