Switching on

Please ensure that the Embedded PC is fully configured before switching on the Embedded PC.

Switch on the Embedded PC as follows:

1. Ensure that all extension, system and fieldbus modules are connected correctly.

2. Check whether the right CX2100 power supply unit and the right installation position were selected.

3. Check whether the Embedded PC is mounted securely on the DIN rail and all required Bus Terminals are connected.

4. Only then switch on the power supply for the power supply unit.

The Embedded PC starts automatically when the external power supply is switched on. The pre-installed operating system is started and all connected extension, system and fieldbus modules are configured.