Safety instructions

Follow the safety instructions to prevent injuries and damage to equipment or property.

Installation

Never work on live equipment. Always switch off the power supply for the device before installation, troubleshooting, or maintenance. Protect the device against unintentional switching on.
Prevent polarity reversal of the data and supply cables, as this may cause damage to the equipment.
Observe the relevant accident prevention regulations for your machine (e.g. the BGV A 3, electrical systems and equipment).
Observe the temperature limit values for operation. If the UPS is operated outside these temperature limits, it may overheat and electrolyte may leak out.
The site for the UPS must be adequately ventilated. In the event of a fault, the UPS can release flammable gases that could cause an explosion.
If you come into contact with electrolyte, rinse the affected body part with water immediately.

Extinguish the battery pack with dry powder, halon, or CO₂.

Do not extinguish with water.
Disconnect the power supply.
During firefighting, wear self-contained protective respiratory equipment and protective clothing.
Air the room after you have extinguished the UPS.

The following safety labels are attached to the name plate of the UPS: