CU1128 - Mounting and removal
The CU1128 EtherCAT hub is fastened to the mounting surface with the aid of a 35 mm mounting rail (according to EN 60715).
Mounting
- Fit the mounting rail to the planned assembly location.
- Suspend the device on the mounting rail with the spring on the lower side of its latching flange.
- Press the device upwards (1).
- Press the upper side of the device (2) against the assembly surface until it latches in the mounting rail.
- Attach the cable.

Removal
- Remove all the cables.
- Press the device upwards (3).
- Pull the other side of the device (4) away from the assembly surface.
