Disassembly and disposal
Before you can remove the control panel from the mounting arm, you must first disconnect the power supply and the cables (see chapter 5.1 Disconnecting the power supply and cables).
Notice | |
Damage to property due to falling down If the control panel hangs from the ceiling and you start disassembly from the mounting arm without securing it, the control panel will fall down.
|
To remove the control panel from the mounting arm, follow the steps shown in Fig. 13:
- 1. Unscrew the fixing screw of the mounting arm adapter completely (section A).
- 2. Pull the mounting arm out of the mounting arm adapter (section B).
- 3. Screw the fixing screw back into the mounting arm adapter (section C).
- You have disassembled the mounting arm from the mounting arm adapter.