Disassembly and disposal
In order to be able to dismount the control panel from the control cabinet, you must first have disconnected the power supply and the cables (see Chapter 5.1 Disconnecting the power supply and cables).
To remove the control panel from the control cabinet, follow the steps shown in Fig. 16 and 17:
- 1. Loosen the clamping levers with a 3.0 mm Allen key (sections A and B). Make sure that the device is secured against falling out of the control cabinet wall.
- 2. Turn the clamping levers back by 90° onto the housing (section C).
- You can now remove the control panel from the corresponding cutout in the control cabinet wall.
Disposal of the control panel
When disposing of the control panel the national electronic waste regulations must be followed.
For disposal, you must remove the device from the control cabinet.