Disassembly and disposal
Before you can remove the Panel PC from the control cabinet front, you must first disconnect the power supply and the cables (see chapter 5.1 Disconnecting the power supply and cables).
To remove the Panel PC from the control cabinet front, follow the steps shown in Fig. 16:
- 1. Loosen the clamping levers with a 2.5 mm Allen key (sections A and B). Make sure that the device is secured against falling out until it is removed from the wall.
- 2. Fold the clamping levers back by 90° onto the housing (section C).
- You can now remove the Panel from the control cabinet.
- 3. To reattach the clamping levers to the housing, retighten them with the Allen key (section D).
Disposal of the Panel PC
When disposing of the Panel PC, be sure to observe the national electronic waste regulations.