Mounting
Notice | |
Extreme environmental conditions Extreme environmental conditions can cause damage to the device.
|
The device is designed for installation on a mounting arm system. The environmental conditions specified for operation must be observed.
The basic version includes a connection block with four M6 threaded holes at a distance of 70 x 130 mm and four M6 threaded holes at a distance of 100 x 100 mm on the rear of the housing. This can be used to install the control panel on a mounting arm system.
The following figure shows the dimensions of the device as an example for all CP3921-151x-00x0. Only the interfaces in the connection block change. All dimensions are in mm.
Fig.15: DimensionsYou can optionally order a Beckhoff mounting arm adapter for your device. The following ordering options are available:
Ordering option | Version |
|---|---|
C9900-M761 | Rotatable and tiltable mounting arm adapter, clamping lever to fix the tilt |
C9900-M763 | Rotatable and tiltable mounting arm adapter |
The ordering option C9900-M761 (A) has a clamping lever to lock the tilt. You can mount both mounting arm adapters facing downwards or upwards. The following figure shows an example of both mounting arm adapters with the orientation facing downwards.
Fig.16: Options mounting arm adapter