Optional interfaces
A variety of interface options are available to you for extending your industrial PC beyond the basic equipment level with additional interfaces. The following table provides information on the available interfaces:
Ordering option | Description | Device generation |
|---|---|---|
FC9071-0000 | Gigabit-Ethernet PC network card 10/100/1000 Mbit/s, 1-channel, PCIe interface, covers the fieldbus connection section | C6920-0060 C6920-0070 C6920-0080 |
C9900-E238 | Additional DVI-D socket led out on a slot bracket, only for PCs with plug-in card slots | C6920-0060 C6920-0070 C6920-0080 |
C9900-E294 | Additional DisplayPort interface, occupies the fieldbus connection section, max. resolution 1920 x 1080, can only be ordered once per PC and not in combination with a second DVI connection | C6920-0060 C6920-0070 C6920-0080 |
C9900-E308 | Serial interface, RS232, electrical isolation, D-sub, 9-pin, PCIe interface covers the fieldbus connection section | C6920-0060 |
PCI and PCIe plug-in card slots
In addition, you have the option to order the industrial PC with additional PCI and PCIe plug-in card slots. In this case you can extend the device by additional fieldbus interfaces and Ethernet ports. The following plug-in card slots are available to you:
Order identifier | Description |
|---|---|
C9900-B506 | 2 PCIe-x1 plug-in card slots on passive backplane, integrated in the C6920, for the insertion of PCIe-x1 plug-in cards up to 190 mm in length |
C9900-B510 | 2 PCI plug-in card slots on passive backplane, integrated in the C6920, for the insertion of PCI plug-in cards up to 190 mm in length |
C9900-B514 | 1 PCI and 1 PCIe-x1 plug-in card slot on passive backplane, integrated in the C6920, for the insertion of 1 PCI and 1 PCIe-x1 plug-in card up to 190 mm in length |
The plug-in card slots are located behind the flap next to the connection section of the industrial PC. In order to mount plug-in cards, you have to loosen the Philips screw and open the flap (see fig. 7).
When you have inserted the plug-in cards, the card connections are located on the right on the top side of the PC (see fig. 8).
The additional plug-in card slots change the dimensions of the industrial PC. The width of the device increases by 70 mm and the depth by 18 mm.