UPS configuration

Once you have installed the installation package with the UPS software components, you can configure the UPS. To start the configuration, go to Start -> Beckhoff -> UPS Configuration.

After starting the configuration, follow the steps below:

1. Click Select.
UPS configuration 1:
Select UPS
2. Select the manufacturer Beckhoff from the drop-down menu.
UPS configuration 2:
Select manufacturer
3. Select at Model/Interface Beckhoff P24Vxxxx.
4. Select the port COM4.
5. Click Finish.
UPS configuration 3:
Select model/interface & port
6. Click Apply.
UPS configuration 4:
Apply configuration
You have configured the UPS. The status of the connected UPS is displayed.
UPS configuration 5:
UPS status