Interface description
The basic version of the device includes the following interfaces:
- Power supply (X101)
- PS/2 mouse and keyboard (X103, X104)
- USB (X108-X111, X212, X213)
- Ethernet RJ45 (X112, X113)
- DVI (X114, X115)
- RS232 (X116)
- DisplayPort (X117)
- Audio connections (X120-X122)
Most of the interfaces are located on the rear side of the industrial PC in the connection section (section A). The two USB interfaces X212 and X213 are located in the front of the industrial PC behind the front flap (section B).
Fig.2: Position interfacesThe following figure shows the assignment of the interfaces in the connection section on the back of the device.
To access the USB interfaces in the front, you first have to open the front flap. Your device comes with a red accessory cover that contains keys. To open the front flap, use the pair of keys with the black key cover. The key for the front flap should only be accessible to administrative personnel who are authorized to connect USB devices to the PC, change drives and press reset buttons or ATX buttons.
To open the front flap, follow these steps:
- 1. Unlock the front flap with the corresponding key (section A).
- 2. Turn the front flap down (section B).
- You now have access to the USB interfaces.
Fig.3: Opening the front flap