Cimrex panel at the SSB of the BX controller

The CAN interface of the BX controller can also be used for connecting an operating panel. In this example, a panel from the company Beijers is connected. Further information on the panel can be found under http://www.beijerelectronics.de.

Cimrex panel at the SSB of the BX controller 1: — Cimrex panel at the SSB of the BX controller

Necessary components

1 x BX3100
Some Bus Terminals for the K-bus (here 3 x KL2114, can be adjusted in the System Manager file)
1 x Cimrex 41
1 x CAB 15 CAN adapter
BX sample program in ST: (sample file)
BX example configuration: (sample file)
Example for Cimrex 41: (sample file)

Baud rate 500 kbaud
CAN slave address 10