Ethernet connection
The connection to Ethernet is made via an RJ45 connector (a Western plug).
Cabling
Connection via hub or switch
Connect the PC's network card to the hub/switch using a standard Ethernet cable, and connect the hub, again using a standard Ethernet cable, to the Bus Terminal controller. Connection via a switch is done in the same way.
Direct connection between PC with Ethernet card and BC9000
Use a crossover Ethernet cable to connect the PC directly with the Bus Terminal Controller.
Pin assignment of the RJ45 plug
|
PIN |
Signal |
Description |
|---|---|---|
|
1 |
TD + |
Transmit + |
|
2 |
TD - |
Transmit - |
|
3 |
RD + |
Receive + |
|
4 |
- |
reserved |
|
5 |
- |
reserved |
|
6 |
RD - |
Receive - |
|
7 |
- |
reserved |
|
8 |
- |
reserved |