3210, DC link overvoltage
The DC link voltage has risen above the permitted DC link voltage.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
3210 |
12816 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
Non-generative brake ramp order to the axis |
Execute Reset-Command (Fault reset). |
|
Possible Causes |
Solutions |
|---|---|
|
The connected motors generate too much electromotive force, causing the DC link voltage to rise. |
You need to reduce the electromotive force. You also can use brake chopper or energy recovery systems to prevent this error. |
|
The configured DC link max voltage might be too low. |
Check the configured DC link max voltage. |
Internal: 0x3210, DC link overvoltage