2310, Continuous over current (device output side)
The demanded current from axis system exceeds permanently the nominal current by more than the nominal current.
|
Diagnostic Code (Hex.) |
Diagnostic Code (Dez.) |
|---|---|
|
2310 |
8976 |
|
Class |
Type |
|---|---|
|
Error |
Error |
|
Standard Reaction |
Reset |
|---|---|
|
NC-Handling order |
Execute Reset-Command (Fault reset). |
|
Possible Causes |
Solutions |
|---|---|
|
Your applikation is so designed, that this exceeds permanently the allowed value. |
Analize your application and make that this overcurrent does not happen. E.g. make that not so many motors run with so much current at once. Or use a bigger power supply module. |