Mechanical installation

Risk of injury!

• The servo drives may only be installed by trained, qualified personnel. The qualified personnel must know and comply with the national accident prevention regulations.
• Safety boots must be worn.

Risk of injury through electric shock!

De-energise all electrical components (servo drive, control cabinet, etc.) before commencing the installation or deinstallation.

Destruction of the servo drive!

• Always install the servo drive vertically
• Provide adequate ventilation for the servo drive. The permissible ambient conditions are specified in the "Technical data" section.
• It is essential to adhere to the required distances (see diagrams below).

Risk of injury through electric shock!

Take care that the mounting plate is earthed (grounded) properly.

Grounding!

If the ground connection of the AX5000 is not done as specified it is possible to get trouble with some EMC issues.