Installation of the AX5801 Safety Card
| |
Serious risk of injury! Due to the DC link capacitors, the DC link terminal points “DC+ and DC-” and “RB+ and RB-” may be subject to life-threatening voltages exceeding 875 VDC, even after the servo drive was disconnected from the supply network. Wait 5 minutes for the AX5101 – AX5125 and AX520x; 15 minutes for the AX5140/AX5160/AX5172; 30 minutes for the AX5190/AX5191; 45 minutes for the AX5192/AX5193 after disconnecting, and measure the voltage at the DC link terminal points “ZK+ and ZK- (DC+ and DC-)”. Safe working is possible once the voltage has fallen below 50 V. |
