X02: DC link (only AX5140)
Via the terminal X2 only a DC link coupling can be configured.
| Terminal point | Connection | Wire cross-section | Tightening torque of the terminal points |
---|---|---|---|---|
DC+ | DC link + |
Max. 16mm² |
| |
DC- | DC link - |
WARNING | |
Serious risk of injury through high electrical voltage! 875 V DC voltage at the DC link terminals X02. Dangerous voltage continues to be present for around 5 minutes after the device has been switched off (AX5140 = 15 min.). Only remove the connector if you wish to configure a drive system with the AX bridge. Only remove the white hexagonal plug if the terminal points are to be rewired. |