Integration into TwinCAT

Integration of the brake module by TCDriveManager and Powermanagement

Integration into TwinCAT 1:

The brake module can be integrated and parameterized in the TCDriveManager as a completely digital I/O device.

The position descriptions are in the table below.

Pos.

Description

 

Pos.

 

1

Powermanagement

 

6

Activation / deactivation of the internal brake resistor

2

Mains voltage selection

 

7

External brake resistor parameter list

3

Phase monitoring (deactivate for single-phase mains)

 

8

0 = Deactivation of the external brake resistor
(not recommended)
1 = Standard energy management with external brake resistor
2 = Energy management with external brake resistor
(standalone)

4

Delay time until the phase monitoring responds
(activate if mains is unclean)

 

9

Enabling / disabling the fan of the external brake resistor and setting the switching thresholds Switch on Level: Percentage specification of the rated capacity value of the external brake resistor. Switch on Temp.: Max. temperature value for the
external brake resistor in °C.

5

Internal brake resistor parameter list