XML measuring system description

If a measuring system is used, it must also be present in the form of an XML description. Without this XML description the measuring system does not appear in the TC Drive Manager selection list. A missing XML description can be generated exclusively by Beckhoff Automation GmbH & Co. KG.

If an incremental (non-absolute) measuring system with sine/cosine or TTL signals is used, a corresponding system can be chosen as "Unknown" from the list shown below.

An overview of feedback systems already used can also be found in the AX5000 system manual. The picture detail below shows a selection of possible feedback systems that could come into question as a measuring system.