Connection example - wiring in series without AX bridge

Wire the relevant connections using individual cables.

CAUTION

Damage to persons and devices!

  • Please ensure that the final supply network connection cable is adequately dimensioned. The dimensioning depends on the sum current and must comply with EN60204-1.
  • To create a DC link group wire the X02 connections with a suitable cable. Voltages up to 890 V may be present.
  • The connectors are designed for a maximum current of 41 A and a maximum conductor cross-section of 6 mm².
  • Avoid phase reversal between the devices!
Connection example - wiring in series without AX bridge 1:

No UL drive system!

The following figure shows an AX wiring in series configuration without AX Bridge. To configure a UL drive system, please refer to the information in chapter "UL drive system – configuration example".


Connection example - wiring in series without AX bridge 2: