Intended use
The servo drives of the AX5000 series are exclusively designed for torque, speed and position control of suitable asynchronous and synchronous three-phase motors. The maximum permissible effective motor voltage must be higher than or at least equal to the effective mains voltage fed into the servo drive.
The servo drives from the AX5000 series are designed for installation as components in electrical systems or machines and may be operated only as integrated system or machine components.
| |
Caution – Risk of injury! Basically, electronic devices are not fail-safe. The machine manufacturer is responsible for ensuring that the connected motors and the machine are brought into a safe state in the event of a failure of the drive system. |
The servo drives may only be operated in enclosed control cabinets and in accordance with the environmental conditions described in the chapter "Technical data".
Improper use
The AX5000 servo drive is not suitable for use in the following areas:
- in ATEX zones without a suitable housing
- in areas with aggressive environments (e.g. aggressive gases or chemicals)
The relevant standards and directives for EMC interference emissions must be complied with in residential areas.
For the section Improper use, please refer to the system manual.