Parameter description

IDN S-0-0216 (Switch parameter set)

Command for executing the parameter set switchover

IDN S-0-0217 (Parameter set preselection)

The parameter number for the switchover is entered in this IDN. If, for example, 2 is entered here and then the command S-0-0216 is executed, the parameter of parameter set S/P-2-xxxx are activated.

IDN S-0-0219 (IDN-list of parameter set)

This table contains all IDNs for which parameter sets 0 to 7 are available.

IDN S-0-0254 (Actual parameter set)

This IDN indicates the currently active parameter set.

IDN P-0-0360 (Parameter set prearrangement)

This IDN is used to specify how many parameter sets are prepared for switchover in the AX5000. If this IDN is parameterized to 3 it is possible to switch between parameter sets 0 to 3.

IDN P-0-0361 (Parameter set configuration)

This list is intended for the IDNs to be switched, which should also be listed in S-0-0219. The parameters of the IDNs entered here are prepared for parameter set switchover and switched accordingly.