REMOTE
ASCII - Command | REMOTE |
|
| |
Syntax Transmit | REMOTE |
| ||
Syntax Receive | REMOTE <Data> | Available in |
| |
Type | Variable ro | MMI | Yes | |
ASCII Format | Integer8 | CANBus Object Number | 35E4 (hex) | |
DIM | - | PROFIBUS PNU | 1828 (dec) IND = 0000xxxx (bin) | |
Range | 0 .. 1 | DPR | 228 (dec) | |
Default | - |
| ||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State | - | Weightning |
| |
Start Firmware | 1.20 |
| ||
Configuration | No | Revision | 2.0 | |
Function Group | Drive Status | EEPROM | No | |
Short Description | Status of the Hardware Enable | |||
Description
The REMOTE command indicates the state of the hardware enable input.
A 1 indicates a high state of the inputs (hardware enable is set), a 0 indicates a Low state.