MBPSET
ASCII - Command | MBPSET |
| Not supported with Standard Drive | |
Syntax Transmit | MBPSET [Data] |
| ||
Syntax Receive | MBPSET <Data> | Available in |
| |
Type | Variable rw | MMI | No | |
ASCII Format | Integer8 | CANBus Object Number | 368E (hex) | |
DIM | - | PROFIBUS PNU | 1998 (dec) IND = 0000xxxx (bin) | |
Range | 0,1 | DPR | 398 (dec) | |
Default | 1 |
| ||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State | - | Weightning |
| |
Start Firmware | 4.04 |
| ||
Configuration | No | Revision | 1.5 | |
Function Group | Modbus | EEPROM | Yes | |
Short Description | Address selection of Modbus+ | |||
Description
This parameter defines the direction of the address selection of the Modbus+ board in the initialization phase.
- MBPSET=0 The address is given by the Modbus board.
- MBPSET=1 The address is given by the drive and it's address in ADDR.