Definitions

Characteristic torque and speed curves Detailed information on characteristic curves can be found under: www.beckhoff.de -> Beckhoff motor curves www.beckhoff.de -> TC Motion Designer

All data, with the exception of the voltage constant, are based on 40 °C ambient temperature and 100 K overtemperature of the winding. The data can have a tolerance of +/-10 %.
If a gear unit is attached the power may be reduced by up to 20 %.

The A-side motor flange is intended for heat dissipation. If a gearbox is attached, the heat dissipation is interrupted and reduces the power of the motor.

By default, the engine heat via the A-flange is dissipated into the machine bed. Due to heating of the gearbox, this is not possible for thermal reasons. This configuration leads to a reduction of the nominal output.