7183, Brake resistor overloaded
The brake resistor load utilization exceeds the 100% threshold.
Diagnostic Code (Hex.) | Diagnostic Code (Dez.) |
|---|---|
7183 | 29059 |
Class | Type |
|---|---|
Error | Error |
Standard Reaction | Reset |
|---|---|
Non-generative brake ramp order to the axis | Execute Reset-Command (Fault reset). |
Possible Causes | Solutions |
|---|---|
Too much energy was dissipated at the brake resistor during operation of the chopper. Incorrect parameterization of the brake resistor could be a reason. | Check the parameterization of the brake resistor. If necessary, connect a more powerful brake resistor. |