71A0, Brake resistor overloaded
The brake resistor load utilization exceeds the parameterized warning threshold.
Diagnostic Code (Hex.) | Diagnostic Code (Dez.) |
|---|---|
71A0 | 29088 |
Class | Type |
|---|---|
Warning | Warning |
Standard Reaction | Reset |
|---|---|
No | Warning: No reset required. |
Possible Causes | Solutions |
|---|---|
Too much energy was dissipated at the brake resistor during operation of the chopper. Incorrect parameterization of the brake resistor could be a reason. | Check the parameterization of the brake resistor. If necessary, connect a more powerful brake resistor. |